1995 Publications
25. A. Romeo and R. Ballarini, “K-Dominance for a Pressurized Griffith Crack,” International Journal of Fracture, Vol. 71, No. 1, pp. 95-97, 1995. 
24. R. Ballarini, S. Islam, and P.G. Charalambides “Near-Tip Dual-Length Scale Mechanics of Mode-I Cracking in Laminate Brittle Matrix Composites,” International Journal Fracture, Vol. 70, pp. 275-304, 1995.
22. R. Ballarini, “A Certain Mixed Boundary Value Problem for a Bimaterial Interface,” International Journal of Solids and Structures, Vol. 32, No. 3/4, pp. 279-289, 1995.
21. A. Romeo and R. Ballarini, “A Crack Very Close to a Bimaterial Interface,” ASME Journal of Applied Mechanics, Vol. 62, pp. 614-619, 1995.
1994 Publications
20. A. Romeo and R. Ballarini, “The Influence of Elastic Mismatch on the Size of the Plastic Zone of a Crack Terminating at a Brittle-Ductile Interface,” International Journal of Fracture, Vol. 65, pp. 183-196, 1994.
19. H. Luo and R. Ballarini, “The Effects of Anisotropy on the Nonlinear Behavior of Bridged Cracks in Long Strips,” Journal of the Mechanics and Physics of Solids, Vol. 42, No. 2, pp. 141-157, 1994.
1993 Publications
18. R. Ballarini and S. Muju, “Stability Analysis of Bridged Cracks in Brittle Matrix Composites,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 115, January 1993, pp. 127-138.
1992 Publications
17. H. Luo, R. Ballarini and J.J. Lewandowski, “Effects of Superposed Hydrostatic Stress on the Elastoplastic Behavior of Two-Phase Composites,” Journal of Composite Materials, Vol. 26, No. 13, pp. 1945-1967, 1992.
1991 Publications
16. R. Ballarini and H. Luo, “Green’s Functions for Dislocations in Bonded Strips and Related Crack Problems,” International Journal of Fracture, Vol. 50, 1991, pp. 239-262.
1990 Publications
15. D.J. Mukai, R. Ballarini and G.R. Miller, “Analysis of Branched Interface Cracks,” ASME Journal of Applied Mechanics, Vol. 57, pp. 887-893, December 1990.
14. R. Ballarini and Y. Hsu, “Three-Dimensional Stress Intensity Factor Analysis of a Surface Crack in a High Speed Bearing,” International Journal of Fracture, Vol. 46, 1990, pp. 141-158.
13. R. Ballarini, “A Rigid Line Inclusion at a Bimaterial Interface,” Engineering Fracture Mechanics, Vol. 37, No. 1, pp. 1-5, 1990.
12. R. Ballarini and S. Ahmed, “Local-Global Analysis of Crack Growth in Continuously Reinforced Ceramic Matrix Composites,” ASME Journal of Engineering for Gas Turbines and Power, Vol. 112, October 1990, pp. 512-520.
11. R. Ballarini, “A Semi-Empirical Analysis of Micro-Cracking in Concrete,” Engineering Fracture Mechanics, Vol. 35, No. 1/2/3, pp. 55-66, 1990.
10. R. Ballarini, A. Parulekar and M.E. Plesha, “Finite Element Modeling of Discontinuities with Dilatancy and Surface Degradation,” Engineering Fracture Mechanics, Vol. 35, No. 1/2/3, pp. 385-397, 1990.
1989 Publications and Earlier
9. M.E. Plesha, R. Ballarini and A. Parulekar, “A Constitutive Model and Finite Element Solution Procedure for Contact-Friction Problems,” ASCE Journal of Engineering Mechanics, Vol. 115, No. 12, December 1989, pp. 2649-2668.
8. R. Ballarini and M. Denda, “The Interaction Between a Crack and a Dislocation Dipole,” International Journal of Fracture, Vol. 37, 1988, pp. 61-71.
7. R. Ballarini and M.E. Plesha, “The Effects of Crack Surface Friction and Roughness on Crack Tip Stress Fields,” International Journal of Fracture, Vol. 34, July 1987, pp. 195-207.
6. R. Ballarini, L.M. Keer and S.P. Shah, “An Analytical Model for the Pullout of Rigid Anchors,” International Journal of Fracture, Vol. 33, February 1987, pp. 75-94.
5. Ballarini, “An Integral Equation Approach for Rigid Line Inhomogeneity Problems,” International Journal of Fracture, Vol. 33, February 1987, R23-R26.
4. R. Ballarini, “Compliance Matrices for Cracked Bodies,” International Journal of Fracture, Vol. 31, August 1986, pp. R63-R66.
3. R. Ballarini, S.P. Shah and L.M. Keer, “Failure Characteristics of Short Anchor Bolts Embedded in a Brittle Material,” Proceedings of the Royal Society of London, A404, pp. 35-54, 1986.
2. R. Ballarini, S.P. Shah and L.M. Keer, “Crack Growth in Cement Based Composites,” Engineering Fracture Mechanics, Vol. 20, No. 3, pp. 433-445, 1984.
1. L.M. Keer and R. Ballarini, “Smooth Contact Between a Rigid Indenter and an Initially Stressed Orthotropic Beam,” A.I.A.A. Journal, Vol. 21, No. 7, July 1983, pp. 1035-1042.